Description

This USB‑A to RJ45 (8P8C) console cable provides a simple, field‑ready connection for direct serial access to switches, routers, firewalls and other network equipment. The cable integrates a compact USB‑to‑serial adapter (FTDI‑class VCP/D2XX or equivalent) inside the molded USB housing to present a reliable virtual COM port on Windows, macOS and Linux. Its flat, tangle‑resistant design with reinforced strain reliefs makes it ideal for bench use, rack work and on‑site troubleshooting. Standard 1.8 m length offers flexible routing while keeping the workspace tidy; options for custom lengths, pinouts and OEM labeling are available to match maintenance and deployment workflows.

Plug‑and‑play behavior is supported on many systems; where required, drivers and quick‑start installation notes are provided. Typical terminal settings (9600 / 8‑N‑1 or 115200 / 8‑N‑1) are supported and the RJ45 pinout follows common console wiring used by major vendors—verify device pinout before use to ensure compatibility.

Specifications

• Product Type: USB‑A to RJ45 (8P8C) console cable
• Converter Chipset: FTDI‑class USB-to-serial converter
• Host Interface: USB-A Male (connects to PC or laptop)
• Device Interface: RJ45 8P8C Male (console pinout)
  
• USB Version: USB 2.0 Full Speed (12 Mbps)
  
• Wire Gauge: Typically 28 AWG
  
• Jacket: PVC, Blue (other colors on request)
  
• Lengths: Standard 1.8 m (custom lengths available)
• Power Design: Bus-powered from USB port (no external power)
• Data Rate: 9600, 19200, 38400, 57600, 115200 bps (higher rates may be supported by host/drivers)
• Driver Support: FTDI‑class VCP/D2XX drivers for Windows/macOS/Linux; quick‑start guide and driver links included
• Compatibility: Works with terminal programs (PuTTY, Tera Term, minicom, screen) and common vendor console ports (Cisco, HPE, Huawei, etc.)
• Compliance: RoHS, REACH
• Customization: Length, shielding, overmolding, marking available
• Service Support: 100% continuity testing, batch traceability, ODM support