Description

The USB to TTL Debug Console Cable provides a direct connection between a computer's USB port and serial TTL interfaces. It integrates an FTDI FT232RL chipset to convert USB signals to 3.3V TTL logic levels. The wire end features three pre-crimped 2.54mm female terminals (GND, TX, RX) with tinned finishes, allowing direct insertion into standard male pin headers or breadboards without soldering.

This cable installs as a Virtual COM Port (VCP) and supports data rates up to 3M baud. It is designed specifically for debugging embedded systems, programming microcontrollers, and accessing console ports on network hardware. The cable is capable of operating over an extended industrial temperature range of -40° to +85°C, ensuring reliability in automotive or harsh environment applications. Note: This 3-pin variant operates at 3.3V logic.

Specifications

• Product Type: USB to TTL Serial Debug Console Cable
• Host Interface: USB-A Male
• Device Interface: 3-Pin 2.54mm Female Header (Tinned Wire End)
• Converter Chipset: FTDI FT232RL
  
• Communication Mode: Asynchronous Serial (UART/TTL)
  
• Logic Level: 3.3V
  
• Shielding: Foil Shielded (Industrial Grade)
• Jacket: PVC, Black (other colors on request)
  
• Lengths: Standard 1.8 m (custom lengths available)
• Power Design: Bus-powered via USB port
• Data Rate: 300 baud to 3M baud (configurable)
  
• OS Support: Windows, Linux, Mac OS X (FTDI VCP/D2XX Drivers)
  
• Compliance: RoHS, REACH