Description
The kit includes an injector and a splitter. The injector adds DC from a power adapter onto the cable; the splitter extracts DC at the far end while passing Ethernet through the RJ45. Ideal for non‑PoE 12 V IP cameras, APs and small routers. This is a passive solution—do not connect directly to 802.3af/at PoE switches; best used on 10/100 Mbps runs.
Specifications
- Type: Passive PoE injector + splitter (use as a pair)
- Data rate: 10/100 Mbps (1/2 & 3/6 for data; 4/5 & 7/8 for power)
- DC interface: 5.5×2.1 mm (injector: female; splitter: male)
- RJ45: 2× male and 2× female in total (each tail has one male + one female)
- Power range: 5–48 V DC (depends on your adapter; 12 V common)
- Polarity: 4/5 positive, 7/8 negative (typical)
- Lead length/Color: ~20–25 cm each; white
- Compatibility: Cat5/5e/6 cables; not suitable for Gigabit four‑pair data
- Notes: Not IEEE 802.3af/at; link distance and usable power depend on cable gauge and voltage drop