Description
Built with bend‑insensitive OM5 fiber optimized for the 850–953 nm band, this cable enables SWDM to run 40/100G over just two fibers. LC/UPC duplex connectors with zirconia ferrules ensure low insertion loss and reliable mating. The 2.0 mm zipcord, tight‑buffered construction is robust and easy to route, while the lime‑green jacket simplifies identification. Each assembly is interferometer‑checked and IL/RL tested with a report.
Specifications
- Fiber: OM5 MM 50/125 μm (BIF; TIA‑492AAAE, IEC 60793‑2‑10 A1a.4)
- Fiber count: 2 (Duplex)
- Connectors: LC/UPC Duplex to LC/UPC Duplex
- Polarity: A(Tx) to B(Rx)
- Jacket/Structure: 2.0 mm tight‑buffered zipcord; color: lime green
- Flame rating: OFNR (Riser)
- Optical performance: IL ≤0.3 dB (typ. 0.2 dB); RL ≥30 dB
- Attenuation: 3.5 dB/km @850 nm; 1.5 dB/km @1300 nm
- Bend radius: 7.5 mm min (optical fiber); cable 20D/10D (dynamic/static)
- Tensile strength: 90/150 N (long/short term)
- Mating durability: ≥1000 cycles
- Operating/Storage temp: −10 to +70 °C / −20 to +70 °C
- Typical reach: 10GBASE‑SR up to 550 m; 40/100G SWDM4 up to 440 m/150 m (system‑dependent)